How To Program Attiny45/85 Using Arduino





Hey,
guys this our first post and we hope u like it .

Step 1 :- Things you need
arduino IDE
to download the attiny files click on the link enter your email id and the file will be sent to your email id and exract it in the hardware file in your arduino IDE
1- arduino uno
1- attiny 45 or 85
1- breadboard
few jumper wires
1- 10 uf capacitor

Optional (if you u want it permanent )
1- perfboard
1- 1 led any colour that u like
1- 220 ohms resistor
 and some pin headers



Step 2:- :Lets get starded
 Open the arduino IDE
and open the arduino isp sketch from the examples and upload it on your uno Note(don't connect anything to  arduino while uploading the isp sketch).
arduino IDE

arduino ISP
Step 3:- Connecting it with attiny 
Unplug ur uno from the computer and connect it with attiny as shown in the picture below after wiring it then connect the 10uf capacitor the + wire to the reset pin and the - wire to gnd pin after wiring it connect it with usb
Here are the pinout
attiny pin 1- arduino pin 10
attiny pin 5- arduino pin 11
attiny pin 6- arduino pin 12
attiny pin 7- arduino pin 13
attiny pin 4- gnd
attiny pin 8- 5v
TA ADA!!!!!!!! now u can program attiny  




Step 4:- Making the circuit permanent
Here are some pic of the shield that I made .
There is also a video .










                                     




Comments